Post your ride pics

[Powerful Pete]

Nothing really exciting, a quick picture taken yesterday at Hains Point – it just sums up a spin on a nice July day, I would think.

[ATTACH=CONFIG]9124[/ATTACH]

[PotomacCyclist]

[ATTACH=CONFIG]9135[/ATTACH]

[ATTACH=CONFIG]9136[/ATTACH]

What is this? Where is this?

[rcannon100]

@PotomacCyclist 120469 wrote:

What is this? Where is this?

Kilroy. WWII.

[PotomacCyclist]

http://www.livescience.com/7577-kilroy-changed-world.html

One possible explanation, and its relevance to the WWII era.

[Supermau]

[ATTACH=CONFIG]9138[/ATTACH]

[dkel]

C&O trip!

Rockford by the Washington Aqueduct:
[ATTACH=CONFIG]9143[/ATTACH]

Mile 30 of the trail, near Poolesville:
[ATTACH=CONFIG]9144[/ATTACH]

[PotomacCyclist]

[ATTACH=CONFIG]9147[/ATTACH]

From March 2015. I rode CaBi that day, over to the location filming for “Sharknado 3” on the pedestrian plaza in front of the White House. Ian Ziering stars in the creature-feature movie.

I was part of a scene where a large group of people were running, presumably from the sharknadoes. I can see a brief glimpse of me in a couple of the trailers, but only my running shoes.

The movie airs tonight on the Syfy Channel at 9 pm.

P.S. Don’t expect the movie to be a quality drama or Emmy Award material. I think that would be obvious from the title. But you never know if someone might tune into something like “Sharknado 3” and expect “Forrest Gump” or “All the President’s Men”.

[dasgeh]

What I’ve been doing on maternity leave

[mstone]

@dasgeh 120566 wrote:

What I’ve been doing on maternity leave

It kinda looks like you forgot something

[dkel]

C&O trip, part II: down to the W&OD!

Ready to leave Harpers Ferry:
[ATTACH=CONFIG]9149[/ATTACH]

Stopped at a winery:
[ATTACH=CONFIG]9150[/ATTACH]

My bike LOVEs the W&OD trailhead in Purcellville:
[ATTACH=CONFIG]9151[/ATTACH]

Found a hotel in Leesburg:
[ATTACH=CONFIG]9152[/ATTACH]

[dkel]

Bonus pic: I found Dickie’s next bike at the bike shop in Purcellville!

[ATTACH=CONFIG]9153[/ATTACH]

I’m told the shop owner turned down an offer of $8000 for the bike. Apparently the bike was his first racing bike back in the ’80s.

[TwoWheelsDC]

First video with all sensors going (power + cadence + HR). It’s a bit of a pain to get the sensor data overlaid just right with the video (the Virb doesn’t read sensors), but it’s kinda fun to watch with the data (for me, at least). 2 hours of hills condensed into just a few minutes…

https://www.youtube.com/watch?v=eKy-cbfOB-4

[Tim Kelley]

@TwoWheelsDC 120580 wrote:

First video with all sensors going (power + cadence + HR). It’s a bit of a pain to get the sensor data overlaid just right with the video (the Virb doesn’t read sensors), but it’s kinda fun to watch with the data (for me, at least). 2 hours of hills condensed into just a few minutes…

https://www.youtube.com/watch?v=eKy-cbfOB-4

Why does the power range max out at only 1000?

[TwoWheelsDC]

@Tim Kelley 120598 wrote:

Why does the power range max out at only 1000?

It’s probably just the way they designed this particular overlay, which is just a pre-made template…I would try to test it, but I doubt I could get even close to 1000W. There are overlays that are just the numbers, but that’s not quite as compelling.

[Tim Kelley]

@TwoWheelsDC 120606 wrote:

It’s probably just the way they designed this particular overlay, which is just a pre-made template…I would try to test it, but I doubt I could get even close to 1000W. There are overlays that are just the numbers, but that’s not quite as compelling.

I’m only teasing…but yeah, go out and try doing a couple max efforts to see what you peak at! Report back in the other thread on talking about power.

[Author]

Posts