January 2017 Road and Trail Conditions
Our Community › Forums › Road and Trail Conditions › January 2017 Road and Trail Conditions
- This topic has 99 replies, 42 voices, and was last updated 8 years, 3 months ago by
DrP.
-
AuthorPosts
-
January 27, 2017 at 1:36 am #1064813
kcb203
Participant@sjclaeys 153650 wrote:
Big tree across the Custis Trail near Lyon Village right before the S-curve of death. No way to get around other than over.
I used my pro cyclocross skills, hopped off, quick hurdle, and was on my way. I wish it was always there–I could use the practice.
January 27, 2017 at 1:31 pm #1064846DrP
Participant@sjclaeys 153650 wrote:
Big tree across the Custis Trail near Lyon Village right before the S-curve of death. No way to get around other than over.
Tree is gone, although there is a lot of debris remaining, so it does require a bit of care.
I am glad it is gone since I did not read this before heading out this morning and that would have been a wake up call coming from the S-curve of death. Depending on where it actually lay, the S-curve of death might have been living up to its name.
January 27, 2017 at 1:35 pm #1064847huskerdont
Participant@DrP 153688 wrote:
Tree is gone, although there is a lot of debris remaining, so it does require a bit of care.
I am glad it is gone since I did not read this before heading out this morning and that would have been a wake up call coming from the S-curve of death. Depending on where it actually lay, the S-curve of death might have been living up to its name.
This was my thought as well as I came out of the curve in the dark and saw the flare remains and the branches on the ground. I could see where the tree had been, and if it had still been there, there’s no way I would have been able to stop in time. Thank you Arlington County for always clearing the downed trees from the trail.
January 30, 2017 at 1:59 pm #1065048DrP
Participant1/30/17: Custis clear, although they clearly didn’t treat just east of the construction to Frederick. Trollheim is covered in snow but passible if one takes care. MVT was clear to at least humpback bridge (I got off going under there). The wooden bridge between the Johnson Memorial Grove and Boundary channel drive was covered in snow, but passable if one took care (and it looked like someone might have fallen on the Pentagon side judging by the way some of the snow was compacted and moved.
However, somewhere along the route there was something sharp that punctured by tire.
January 30, 2017 at 2:01 pm #1065051Steve O
ParticipantW&OD near Sandburg.
Slightly crispy.
I’m guessing one of those tracks is hozn’sUPDATE – at 10:45 am this was all gone. Trail was clear and damp.
January 30, 2017 at 2:11 pm #1065053Crickey7
ParticipantExcessive natural beauty caused me some delays on the CCT today.
January 30, 2017 at 2:41 pm #1065055lordofthemark
ParticipantFrom the Pentagon there was about an inch of snow (already with multiple tire tracks) on the footbridge by the LBJ grove. The MVT over the humpback was clear. Curious how the MVT down to 4MRT, and 4MRT itself were. I took the bus from Shirlington to Pentagon, because some ice in front of my building got me nervous, but after seeing the MVT, I think I wimped out unnecessarily.
January 30, 2017 at 3:06 pm #1065062LeprosyStudyGroup
Participant@lordofthemark 153910 wrote:
From the Pentagon there was about an inch of snow (already with multiple tire tracks) on the footbridge by the LBJ grove. The MVT over the humpback was clear. Curious how the MVT down to 4MRT, and 4MRT itself were. I took the bus from Shirlington to Pentagon, because some ice in front of my building got me nervous, but after seeing the MVT, I think I wimped out unnecessarily.
It wasn’t frozen or slippery, even on the airport bridges. I bet there will be some ice tonight and tomorrow morning though.
***I was totally wrong. I love losing bets like this!
January 31, 2017 at 2:16 pm #1065128DrP
ParticipantThe dumpster has returned to N Quincy between Fairfax and 9th. It has been back for over a week now. Grrrr.
-
AuthorPosts
- You must be logged in to reply to this topic.