Wonky bike computer….possible solutions?

[americancyclo]

First place I’d check is where the cable meets the sensors, or the mount. Next I’d look for places it might have contacted while on the rack. Possible you got some salt or sand in the connection between the mount and the display. Lastly I’d check the battery, if you haven’t replaced that in a while.

[PrintError]

Mine also gets wonky if it gets wet and I don’t dry/clean the connectors.

[ronwalf]

Here I was hoping ‘wonky’ meant your computer started giving you the truly nerdy info, like how fast you have to peddle to make the next green.

Check that the sensor and magnet didn’t get misaligned?

[JustinW]

@ronwalf 8433 wrote:

Here I was hoping ‘wonky’ meant your computer started giving you the truly nerdy info, like how fast you have to peddle to make the next green.

Check that the sensor and magnet didn’t get misaligned?[/quote]

Inevitably the answer to that first bit is “faster than you are pedalling now”….

Checked the alignment of the magnet and sensor, that is fine. Will inspect the other points for failure…darn technology won’t let me ride…..

[Author]

Posts