Free: Used tires and tubes

Our Community Forums Classifieds Free: Used tires and tubes

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1056297
    vvill
    Participant

    I’ll take the Presta tubes and the Ritchey tire if you can’t find any takers.

    Funnily enough I currently run that Tioga combo on my beater bike (stock from GT Avalanche from 2005 or so), but the rear is getting worn down a lot.

    I can probably meet in Falls Church <=> Ballston area sometime this week.

    #1056301
    reji
    Participant

    @vvill 146736 wrote:

    I’ll take the Presta tubes and the Ritchey tire if you can’t find any takers.

    Funnily enough I currently run that Tioga combo on my beater bike (stock from GT Avalanche from 2005 or so), but the rear is getting worn down a lot.

    I can probably meet in Falls Church <=> Ballston area sometime this week.

    Great! Just sent you a PM.

    #1056264
    reji
    Participant

    Updated
    @reji 146734 wrote:

    Time to clean out the garage!

    Tires:
    Continental SportContact (1) 700×28 wire bead. Probably ~1000 miles on it. (Gone)
    Vittoria Randonneur (2) 700×28 wire bead. Mostly new, prob ~200 miles on them. (Gone)
    Ritchey Megabite (1) 26×2.1 wire bead. Don’t know how many miles, but it’s got a good bit of tread left. (Gone)
    Tioga Extreme EX (1) 26×2.1 wire bead. Center knobs show most wear (I think my friend road only on paved trails) but still a decent amount left. (Still avail)
    Tioga Factory XC (1) 26×1.95 wire bead. Same as the other Tioga but a bit more worn. Probably not too far from being tossed out. (Still avail)

    Tubes:
    Kenda Pyramid 26×1.5-1.95 Presta (new) (Gone)
    Kenda Pyramid 26×1.5-1.95 Schrader (Still avail)
    Cheng Shin 26×1.9-2.125 Schrader (Still avail)
    Bontrager 26×1.75-2.35 (2) Presta (Gone)

    I commute daily between Fairfax (close to GMU) and Ballston so if you’re interested in any of these, we may be able to arrange a drop off.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.