DDOT update on M Street cycletrack

Our Community › Forums › General Discussion › DDOT update on M Street cycletrack

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • November 22, 2013 at 2:59 pm #986657
    cyclingfool
    Participant

    @PotomacCyclist 69910 wrote:

    On the 1500 block of M Street NW, the lane will be installed as a “traditional” bike lane.

    Damn church!

    November 27, 2013 at 7:08 pm #987061
    PotomacCyclist
    Participant

    Installation began this week as previously announced.

    http://ddotdish.com/2013/11/27/m-street-nw-cycle-track-installation-now-underway/

    Looks like the M Street cycletrack may have a more significant buffer between bike and car lanes, at least on some blocks. Crews are adding what appears to be granite barriers to keep cars out of the cycletrack:

    [ATTACH=CONFIG]4151[/ATTACH]

    There are narrow gaps in the barrier, presumably to allow cyclists to ride in and out of the lane. But the gaps are not nearly wide enough to allow a driver to steer a car into the cycletrack. If this is the actual design, then it would be a major upgrade from the existing cycletracks in D.C. If the new design works well, could we see a retrofit of the 15th St. and L St. cycletracks too?

    November 27, 2013 at 7:12 pm #987062
    TwoWheelsDC
    Participant

    @PotomacCyclist 70370 wrote:

    There are narrow gaps in the barrier, presumably to allow cyclists to ride in and out of the lane.

    And drainage.

    November 27, 2013 at 7:14 pm #987063
    cyclingfool
    Participant

    @TwoWheelsDC 70371 wrote:

    And drainage.

    Good point.

    November 27, 2013 at 7:29 pm #987065
    Riley Casey
    Participant

    These would be a suitable retrofit for the L St cycle track.

    @PotomacCyclist 70370 wrote:

    Installation began this week as previously announced.

    If the new design works well, could we see a retrofit of the 15th St. and L St. cycletracks too?

    November 27, 2013 at 8:26 pm #987071
    DSalovesh
    Participant

    That particular curbing at RI & Connecticut is very special because riders have the option to continue unprotected on M or jog right and then left on RI, for proper positioning to continue straight or turn left.

    Widening that bottleneck on M was not chosen because it would require shrinking the rain garden (an Ellen Jones project from her days at Golden Triangle BID), and while DDOT may still add sharrows to the straight path I was pretty passionate a couple of years ago in suggesting, well, pretty much what they’re doing, in order to maintain a protected lane from end to end.

    Came so very close, too.

    December 3, 2013 at 8:09 pm #987442
    Terpfan
    Participant

    They are out right now between 15th and 17th working on the lines.

    December 3, 2013 at 9:32 pm #987459
    jrenaut
    Participant

    @Terpfan 70783 wrote:

    They are out right now between 15th and 17th working on the lines.

    I’ll bet they’re pissed that this unseasonably warm weather is screwing up their plans to never ever put in the cycletrack. Luckily it’s supposed to rain later this week.

    December 3, 2013 at 10:12 pm #987461
    dasgeh
    Participant

    @PotomacCyclist 70370 wrote:

    There are narrow gaps in the barrier, presumably to allow cyclists to ride in and out of the lane. But the gaps are not nearly wide enough to allow a driver to steer a car into the cycletrack. If this is the actual design, then it would be a major upgrade from the existing cycletracks in D.C. If the new design works well, could we see a retrofit of the 15th St. and L St. cycletracks too?

    Hooray for barriers, but will the gaps be usable for all bikes? I’m a little worried that a cargo bike / long-wheelbase could get stuck when something with big enough wheels to roll over the protection blocks the bike lane.

    Also, will the protection be visible at night?

    December 4, 2013 at 5:29 am #987498
    PotomacCyclist
    Participant

    Maybe they will add standard flexible bollards with reflective tape, in the narrow gap between the parallel granite blocks.

    December 4, 2013 at 10:10 am #987499
    mstone
    Participant

    @PotomacCyclist 70843 wrote:

    Maybe they will add standard flexible bollards with reflective tape, in the narrow gap between the parallel granite blocks.

    Safety first

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.